There is exactly one number in Google Ads that, when it goes up, your cost per acquisition should go down. It is called Quality Score, it runs from 1 to 10, and Google has spent fifteen years making sure you cannot see how it is calculated, what moved it and tracking it over time is a pain.
Does it also feel to you that all the advertised levers such as Broad match, Search Partners, Display expansion, Performance Max (Pmax) increases spend. Quality Score is the one mechanism that rewards you for being more relevant with a cheaper auction, and it is also the one metric with no history chart, no documented weights, no thresholds, and a set of component labels (“below average”, “average”, “above average”) that are deliberately coarse. My frustration is real, or rather WAS real until recently (more on that in a minute). But if you wanted to design a metric so advertisers could not optimise it, this is what it would look like.
I have spent more hours than I would like to admit trying to get a reliable answer to a simple question: what, specifically, do I change on a landing page or an ad to move a keyword’s landing page experience from “average” to “above average”, and how long until I can tell whether it worked? The answer, after reading everything Google publishes, everything the PPC industry has reverse-engineered, and a lot of Reddit, is: nobody outside Google knows, and Google will not give you the data to find out. Even the Google people don't know. I met many at Google Live in Dublin, Ireland asking them, "How do I reliably impact the score?" Quite frankly no answer was satisfying because: they didn't know. This article is about that, and about the one thing that has changed recently: with the Google Ads API exposed through MCP, you can finally build the history Google refuses to show you.
What does Google tell you about Quality Score — and what does it carefully hide?
Google’s own documentation on Quality Score fits on one screen. The score is a number from 1 to 10 per keyword, built from three components:
- expected CTR (click-through rate)
- landing page experience, and
- ad relevance.
Each component is reported as one of three labels: below average, average or above average. And then, in the same help article, two sentences that most advertisers never reconcile. Google describes Quality Score as a diagnostic tool meant to give you a sense of how well your ad quality compares to other advertisers, and states that it is not an input in the ad auction.
Read that again. The metric Google tells you to improve, is not used to decide what your ads cost. while the 1 to 10 you see is a lagging, rounded, keyword-level summary of them it would still be valuable to see how changes improve the landing page experience. Yes, Google says it does not impact the CPC (Cost-Per-Click) but of course if they provide a diagnosis then my expectation is to be able to react to that diagnosis, improve my ad texts, and tighten up my ad group-themes to improve the CPA (Cost-Per-Acquisition).
Here is what the documentation does not contain, in order of how much it would help.
No weights
Nothing from Google says how the three components combine. Not “roughly equal”, not “CTR matters most”, nothing. The entire PPC industry’s understanding of the weighting comes from outside reverse-engineering (Chapter 2), and the published guides contradict each other.
No thresholds
Each component is reported as one of three buckets. Google does not say where the bucket boundaries are, what the comparison set is (other advertisers on the same exact query? the same vertical? the same country?), or how far inside a bucket your keyword sits. A keyword at the top of “average” and one at the bottom of “average” look identical. You can improve a landing page substantially, move from the bottom of a bucket to the top, and see no change at all in the interface. Then one more tweak flips it to “above average” and you have no idea which change did it.
No timing
Google does not say how often the score is recomputed, how much history it looks at, or how long a change takes to be reflected. The documentation notes that the score is based on historical impressions for exact searches of your keyword, This evaluation is based on a comparison with other advertisers whose ads showed for the exact same search over the last 90 days. I have seen reddit users saying anything from two to six weeks for a landing page change to register. Google quotes nothing.
Add to that the null problem: for keywords without enough exact-match impressions, the score shows as a dash. In a B2B SaaS account where the money terms get a few hundred impressions a month, a meaningful share of keywords never get a score at all, and the ones that do are scored on a thin sample Google will not size for you.
Why does Quality Score show a dash — and what does Google tell you to do about it?
Google’s advice for a keyword with no score is worth reading closely, because it is the Recommendations tab in miniature. The help article first establishes that the score is based on historical impressions for exact searches of your keyword, so changing match type does not change how it is calculated. Then, to resolve the dash, it offers two fixes. One: use Keyword Planner to find higher-volume keywords with sufficient search volume. Two: broaden your match types, because while that does not change the calculation, it lets the keyword enter more auctions and gather enough exact-match data to earn a score.
So the official path to a Quality Score on your most precise, highest-intent keyword is to bid on different, broader keywords, or to loosen the match type so you pay for searches that are not the keyword, in the hope that enough of them happen to be exact. Both fixes are spend. Neither tells you the number you need: “enough” is undefined, and a B2B SaaS advertiser with a few hundred exact impressions a month on “desk booking software” cannot tell whether the dash means 50 more impressions or 5,000.
The stranger part is that the dash is not necessary. Expected CTR plausibly needs auction history, but ad relevance and landing page experience do not. Google crawls the page; Google has the ad text and the keyword. Rating whether the page is fast, mobile-usable, and about the thing the ad promised is a judgement any modern model can make on day one, without a single impression, and Google already states that information from its crawlers may be used to assess ad quality. An independent, impression-free benchmark of those two components would let an advertiser fix the page and the ad before spending, rather than spending to find out. That it does not exist, in 2026, is a choice.
What Google does publish is a page of advice: make ads relevant to keywords, improve landing page speed and mobile usability, match the page to the ad. It is correct, generic, and unverifiable. You cannot tell whether a given fix moved a given component, because the component has three states, no number, and no history chart.
What actually moves each Quality Score component?
Strip away the weights and the advice converges on a short list, none of which Google has quantified:
- Expected CTR: the keyword in the headline, ad assets (sitelinks, callouts), competitive copy, and, controversially, the account’s historical CTR. Google has said expected CTR is compared to other advertisers on the same exact-match keyword, so your rating can fall because a competitor wrote a better ad, with no change on your side.
- Ad relevance: the keyword, or close variants, in headlines and descriptions; tight ad groups; fewer keywords per ad group. With responsive search ads assembling 15 headlines dynamically, how “relevance” is judged for a keyword that may never have appeared in the served combination is undocumented.
- Landing page experience: page speed, mobile usability, the keyword and ad promise on the page, “transparency” (contact info, privacy policy), and behavioural signals such as time on page or bounce rate, which Google has never confirmed it uses for this component. Google does say that information obtained from any of Google’s crawlers may be used to assess ad quality, which raises the possibility that organic-search page assessments leak into the paid score. Nobody has been able to test that.
Reddit, in summary
The r/PPC threads on Quality Score follow a pattern: someone with a 4 or 5 on their core keyword lists everything they have done (dedicated landing page, keyword in every headline, sub-two-second load, mobile-first), asks what else there is, and the replies split three ways. One group says ignore it, Quality Score is a symptom not a cause, optimise for conversions. One group offers more of the same advice from the list above. One group says, accurately, that there is no way to know, and that Google’s reps will read the help article back to you. The thread that captures the mood best is any one where a keyword’s landing page experience drops from above average to average with no change to the page, and the only honest answer anyone can give is that a competitor’s page got better, or Google’s model changed, or both, and you will never find out which. I’m having a tough time ignoring it, as it always looks like something is off, not optimized, and has room for improvement. Knowing its only a diagnosis and not impacting CPC really seems like a contradiction, because indirectly that, all parameters are certainly impacting Smart Bidding and Conversions. After all, we are not here for clicks, we are here for conversions. So I appreciate the diagnosis, but please doctor tell me what to do! But hold on, that means I mustn’t come back for further tests. And certainly Google wants us to test as much as possible.
Why is there no Quality Score history chart?
The part that turns opacity into something closer to obstruction is time. Every other metric in Google Ads has a chart. Click any keyword and you get clicks, impressions, CPC and conversions plotted over any date range. Quality Score has no chart. Neither do its three components. The interface shows you today’s number and today’s three labels, and if you want to know what they were the day before you changed the landing page, you are on your own.
To be precise about what exists, because it matters for what follows: you can select the historical score in Google Ads. In May 2017 Google added four columns, “Qual. Score (hist.)”, “Landing page exper. (hist.)”, “Ad relevance (hist.)” and “Exp. CTR (hist.)”, and if you segment a keyword report by day, each row shows the score as it stood at the end of that day. So Google has been storing daily snapshots for nearly a decade. But it is a column. Turning it into a chart, and then correlating any improvement or deterioration with what changed on the website, in the ads, or at the competition, is tedious enough that almost nobody does it.
What it has not done, in those nine years, is draw a line through them. The limitations are specific:
- No visualisation. The history is a table of integers and labels, one row per keyword per day. To see a trend you export it and chart it yourself. There is no account-level or campaign-level impression-weighted Quality Score over time, which is the number you actually want.
- Nulls everywhere. Any day without enough exact-match impressions shows a dash, and the “hist.” column shows only the last known score for the period. For low-volume B2B keywords the series is mostly gaps.
- No overlay with change history. The one thing the history is for, telling whether a change you made moved the score, requires joining the daily snapshots to the change history log. The interface offers no way to do that. WordStream’s write-up of the 2017 launch admitted that reconciling change history with Quality Score movements had been prohibitively difficult, and the launch did not fix that; it only made the raw numbers reachable. And the third source of movement, the competition, is logged nowhere at all: a competitor rewriting their ad or shipping a faster page can drop your expected CTR or landing page label with no change on your side, and the only trace is a lagging Auction Insights report that cannot be joined to anything.
- Component history is still three labels. You can see that landing page experience was “average” on Monday and “above average” on Thursday. You cannot see it drifting toward the boundary in the weeks before, because there is no number underneath the label.
How can MCP fix Quality Score tracking?
This is the part of the story that has changed. The Google Ads API has exposed daily Quality Score snapshots since 2016, but using them meant writing a script, scheduling it, maintaining a spreadsheet, and then doing the change-history join by hand. With the Google Ads API wrapped in an MCP server and a model like Claude on the other end, the whole pipeline collapses into a conversation: pull the snapshots, store them, join them to what you changed, and ask questions in plain language. Here is the method.
Pair this with an event log, showing who changed what and when: ad copy edits, final URL changes, keyword additions, bid strategy switches.